Ink

Ink (from Late Lat. encaustum, Gr. ἔγκαυστον, the purple ink used by Greek and Roman emperors, from ἐγκαίειν, to burn in), in its widest signification, a substance employed for producing graphic tracings, inscriptions, or impressions on paper or similar materials. The term includes two distinct conditions of pigment or colouring matter: the one fluid, and prepared for use with a pen or brush, as writing ink; the other a glutinous adhesive mass, printing ink, used for transferring to paper impressions from types, engraved plates and similar surfaces.

The ancient Egyptians prepared and used inks (Flinders Petrie discovered a papyrus bearing written characters as old as 2500 B.C.), and in China the invention of an ink is assigned to Tien-Tcheu, who lived between 2697 B.C. and 2597 B.C. These early inks were prepared from charcoal or soot mixed with gum, glue or varnish. Sepia (q.v.), the black pigment secreted by the cuttle-fish, was used as a writing fluid by the Romans. The iron-gall ink, i.e. an ink prepared from an iron salt and tannin, appears to have been first described by the monk Theophilus, who lived in the 11th century A.D., although Pliny, in the 1st century A.D., was acquainted with the blackening of paper containing green vitriol by immersion in an infusion of nut-galls. Iron-gall inks, prepared by mixing extracts of galls, barks, &c., with green vitriol, subsequently came into common use, and in the 16th century recipes for their preparation were given in domestic encyclopaedias. Their scientific investigation was first made by William Lewis in 1748. The earlier iron-inks were essentially a suspension of the pigment in water. In the early part of the 19th century the firm of Stephens introduced the first of the so-called blue-black inks under the name of “Stephens’ writing fluid.” Solutions of green vitriol and tannin, coloured by indigo and logwood, were prepared, which wrote with a blue tint and blackened on exposure, this change being due to the production of the pigment within the pores of the paper. The “alizarine” inks, patented by Leonhardi in 1856, are similar inks with the addition of a little madder. The application of aniline colours to ink manufacture in England dates from Croc’s patent of 1861.

Writing Inks.—Writing inks are fluid substances which contain colouring matter either in solution or in suspension, and commonly partly in both conditions. They may be prepared in all shades of colour, and contain almost every pigment which can be dissolved or suspended in a suitable medium. The most important of all varieties is black ink, after which red and blue are most commonly employed. Apart from colour there are special qualities which recommend certain inks for limited applications, such as marking inks, ineradicable ink, sympathetic ink, &c. A good writing ink for ordinary purposes should continue limpid, and flow freely and uniformly from the pen; it should not throw down a thick sludgy deposit on exposure to the air; nor should a coating of mould form on its surface. It should yield distinctly legible characters immediately on writing, not fading with age; and the fluid ought to penetrate into the paper without spreading, so that the characters will neither wash out nor be readily removed by erasure. Further, it is desirable that ink should be non-poisonous, that it should as little as possible corrode steel pens, that characters traced in it should dry readily on the application of blotting paper without smearing, and that the writing should not present a glossy, varnished appearance.

Tannin Inks.—These inks are prepared from galls, or other sources of tannin, and a salt of iron, with the addition of some agglutinant in the case of the so-called oxidized inks, or a colouring matter in the case of unoxidized inks. Such mixtures form the staple black inks of commerce; they are essentially an insoluble iron gallate in extremely fine division held in suspension in water or a soluble compound dissolved in water.

On long exposure to air, as in inkstands, or otherwise, tannin inks gradually become thick and ropy, depositing a slimy sediment. This change on exposure is inevitable, resulting from the gradual oxidation of the ferrous compound, and it can only be retarded by permitting access of air to as small surfaces as possible. The inks also have a tendency to become mouldy, an evil which may be obviated by the use of a minute proportion of carbolic acid; or salicylic acid may be used.

The essential ingredients of ordinary black ink are—first, tannin-yielding bodies, for which Aleppo or Chinese galls are the most eligible materials; second, a salt of iron, ferrous sulphate (green vitriol) being alone employed; and third, a gummy or mucilaginous agent to keep in suspension the insoluble tinctorial matter of the ink. For ink-making the tannin has first to be transformed into gallic acid. In the case of Aleppo galls this change takes place by fermentation when the solution of the galls is exposed to the air, the tannin splitting up into gallic acid and sugar. Chinese galls do not contain the ferment necessary for inducing this change; and to induce the process yeast must be added to their solution. To prepare a solution of Aleppo galls for ink-making, the galls are coarsely powdered, and intimately mixed with chopped straw. This mixture is thrown into a narrow deep oak vat, provided with a perforated false bottom, and having a tap at the bottom for drawing off liquid. Over the mixture is poured lukewarm water, which, percolating down, extracts and carries with it the tannin of the galls. The solution is drawn off and repeatedly run through the mixture to extract the whole of the tannin, the water used being in such proportion to the galls as will produce as nearly as possible a solution having 5% of tannin. The object of using straw in the extraction process is to maintain the porosity of the mixture, as powdered galls treated alone become so slimy with mucilaginous extract that liquid fails to percolate the mass. For each litre of the 5% solution about 45 grammes of the iron salt are used, or about 100 parts of tannin for 90 parts of crystallized green vitriol. These ingredients when first mixed form a clear solution, but on their exposure to the air oxidation occurs, and an insoluble blue-black ferrosoferric gallate in extremely fine division, suspended in a coloured solution of ferrous gallate, is formed. To keep the insoluble portion suspended, a mucilaginous agent is employed, and those most available are gum senegal and gum arabic. An ink so prepared develops its intensity of colour only after some exposure; and after it has partly sunk into the paper it becomes oxidized there, and so mordanted into the fibre. As the first faintness of the characters is a disadvantage, it is a common practice to add some adventitious colouring matter to give immediate distinctness, and for that purpose either extract of logwood or a solution of indigo is used. When logwood extract is employed, a smaller proportion of extract of galls is required, logwood itself containing a large percentage of tannin. For making an unoxidized or blue-black ink indigo is dissolved in strong sulphuric acid, and the ferrous sulphate, instead of being used direct, is prepared by placing in this indigo solution a proper quantity of scrap iron. To free the solution from excess of uncombined acid, chalk or powdered limestone is added, whereby the free acid is fixed and a deposit of sulphate of lime formed. A solution so prepared, mixed with a tannin solution, yields a very limpid sea-green writing fluid, and as all the constituents remain in solution, no gum or other suspending medium is necessary. In consequence the ink flows freely, is easily dried and is free from the glossy appearance which arises through the use of gum.

China ink or Indian ink is the form in which ink was earliest prepared, and in which it is still used in China and Japan for writing with small brushes instead of pens. It is extensively used by architects, engineers and artists generally, and for various special uses. China ink is prepared in the form of sticks and cakes, which are rubbed down in water for use. It consists essentially of lamp-black in very fine condition, baked up with a glutinous substance; and the finer Oriental kinds are delicately perfumed. The following description of the manufacture as conducted in Japan is from a native source:—

It is said that the size used in Chinese kinds is of vegetable origin.

Logwood Ink.—Under the name of chrome ink a black ink was discovered by Runge, which held out the promise of cheapness combined with many excellent qualities. It is prepared by dissolving 15 parts of extract of logwood in 900 parts of water, to which 4 parts of crystallized sodium carbonate are added. A further solution of 1 part of potassium chromate (not bichromate) in 100 parts of water is prepared, and is added very gradually to the other solution with constant agitation. The ink so obtained possesses an intense blue-black colour, flows freely and dries readily, is neutral in reaction and hence does not corrode steel pens, and adheres to and sinks into paper so that manuscripts written with it may be freely washed with a sponge without danger of smearing or spreading. It forms a good copying ink, and it possesses all the qualities essential to the best ink; but on exposure to air it very readily undergoes decomposition, the colouring matter separating in broad flakes, which swim in a clear menstruum. It is affirmed by Viedt that this drawback may be overcome by the use of soda, a method first suggested by Böttger.

Logwood forms the principal ingredient in various other black inks used, especially as copying ink. A very strong decoction of logwood or a strong solution of the extract with ammonium-alum yields a violet ink which darkens slowly on exposure. Such an ink is costly, on account of the concentrated condition in which the logwood must be used. If, however, a metallic salt is introduced, a serviceable ink is obtained with the expenditure of much less logwood. Either sulphate of copper or sulphate of iron may be used, but the former, which produces a pleasing blue-black colour, is to be preferred. The following is the formula most highly recommended for this ink. A clear solution of 20 kilos of extract of logwood in 200 litres of water is obtained, to which is added, with agitation, 10 kilos of ammonium-alum dissolved in 20 litres of boiling water. The solution is acidified with 0.2 kilo of sulphuric acid, which has the effect of preventing any deposit, and finally there is added a solution of 1.5 kilos of sulphate of copper dissolved in 20 litres of water. This compound is exposed to the air for a few days to allow the colour to develop by oxidation, after which it is stored in well-corked bottles. The acid condition of this ink has a corrosive influence on steel pens; in all other respects it is a most valuable writing fluid.

Aniline Inks.—Solutions of aniline dye-stuffs in water are widely used as inks, especially coloured varieties. They are usually fugitive. Nigrosine is a black ink, which, although not producing a black so intense as common ink, possesses various advantages. Being perfectly neutral, it does not attack pens; it can easily be kept of a proper consistency by making up with water; and its colour is not injuriously affected by the action of acids. Its ready flow from stylographic pens led to the name “stylographic ink.” Other aniline inks are mentioned below.

Copying Ink.—Ink which yields by means of pressure an impression, on a sheet of damped tissue paper, of characters written in it is called copying ink. Any ink soluble in water, or which retains a certain degree of solubility, may be used as copying ink. Runge’s chrome ink, being a soluble compound, is, therefore, so available; and the other logwood inks as well as the ordinary ferrous gallate inks contain also soluble constituents, and are essentially soluble till they are oxidized in and on the paper after exposure to the air. To render these available as copying inks it is necessary to add to them a substance which will retard the oxidizing effect of the air for some time. For this purpose the bodies most serviceable are gum arabic or senegal, with glycerin, dextrin or sugar, which last, however, renders the ink sticky. These substances act by forming a kind of glaze or varnish over the surface of the ink which excludes the air. At the same time when the damp sheet of tissue paper is applied to the writing, they dissolve and allow a portion of the yet soluble ink to be absorbed by the moistened tissue. As copying ink has to yield two or more impressions, it is necessary that it should be made stronger, i.e. that it should contain more pigment or body than common ink. It, therefore, is prepared with from 30 to 40% less of water than non-copying kinds; but otherwise, except in the presence of the ingredients above mentioned, the inks are the same. Copying ink pencils consist of a base of graphite and kaolin impregnated with a very strong solution of an aniline colour, pressed into sticks and dried.

Red Ink.—The pigment most commonly employed as the basis of red ink is Brazil-wood. Such an ink is prepared by adding to a strong decoction of the wood a proportion of stannous chloride (tin spirits), and thickening the resulting fluid with gum arabic. In some instances alum and cream of tartar are used instead of the stannous chloride. Cochineal is also employed as the tinctorial basis of red ink; but, while the resulting fluid is much more brilliant than that obtained from Brazil-wood, it is not so permanent. A very brilliant red ink may be prepared by dissolving carmine in a solution of ammonia, but this preparation must be kept in closely stoppered bottles. A useful red ink may also be made by dissolving the rosein of Brook, Simpson and Spiller in water, in the proportion of 1 to from 150 to 200 parts.

Blue Ink.—For the production of blue ink the pigment principally used is Prussian blue. It is first digested for two or three days with either strong hydrochloric acid, sulphuric acid or nitric acid, the digested mass is next very largely diluted with water, and after settling the supernatant liquid is siphoned away from the sediment. This sediment is repeatedly washed, till all traces of iron and free acid disappear from the water used, after which it is dried and mixed with oxalic acid in the proportion of 8 parts of Prussian blue to 1 of the acid, and in this condition the material is ready for dissolving in water to the degree of colour intensity necessary. An aniline blue ink may be prepared by dissolving 1 part of bleu de Paris in from 200 to 250 parts of water.

Marking Ink.—The ink so called, used principally for marking linen, is composed of a salt of silver, usually the nitrate, dissolved in water and ammonia, with a little provisional colouring matter and gum for thickening. The colour resulting from the silver salt is developed by heat and light; and the stain it makes, although exceedingly obstinate, gradually becomes a faint brownish-yellow. The following yields a good marking ink. Equal parts of nitrate of silver and dry tartaric acid are triturated in a mortar, and treated with water, when a reaction takes place, resulting in the formation of tartrate of silver and the liberation of nitric acid. The acid is neutralized, and at the same time the silver tartrate is dissolved by the addition of ammonia, and this solution with colouring matter and gum forms the ink, which may be used with an ordinary steel pen.

Many vegetable juices, e.g. of Coriaria thymifolia, Semecarpus anacardium, Anacardium occidentale (Cashew), are inks of this type.

Gold and silver inks are writing fluids in which gold and silver, or imitations of these metals, are suspended in a state of fine division. In place of gold, Dutch leaf or mosaic gold is frequently substituted, and bronze powders are used for preparing a similar kind of ink. The metallic foil is first carefully triturated into a fine paste with honey, after which it is boiled in water containing a little alkali, and then repeatedly washed in hot water and dried at a gentle heat. A solution is prepared consisting of 1 part of pure gum arabic and 1 part of soluble potash glass in 4 parts of distilled water, into which the requisite quantity of the metallic powder prepared is introduced. Owing to the superior covering nature of pure gold, less of the metal is required than is necessary in the case of silver and other foils. In general 1 part of foil to 3 or 4 parts of solution is sufficient. The metallic lustre of writing done with this solution may be greatly heightened by gently polishing with a burnishing point. Another gold ink depends upon the formation of purple of Cassius; the linen is mordanted with stannous chloride, and the gold applied as a gummy solution of the chloride.

Indelible or incorrodible ink is the name given to various combinations of lamp-black or other carbonaceous material with resinous substances used for writing which is exposed to the weather or to the action of strong acids or alkaline solutions. An ink having great resisting powers may be conveniently prepared by rubbing down Indian ink in common ink till the mixture flows easily from the pen. Other combinations have more the character of coloured varnishes.

Sympathetic inks are preparations used for forming characters which only become visible on the application of heat or of some chemical reagent. Many chemicals which form in themselves colourless solutions, but which develop colour under the influence of reagents, may be used as sympathetic ink, but they are of little practical utility. Characters written in a weak solution of galls develop a dark colour on being treated with a solution of copperas; or, vice versa, the writing may be done in copperas and developed by the galls solution. Writing done in various preparations develops colour on heating which fades as the paper cools. Among such substances are solutions of the chlorides of cobalt and of nickel. Very dilute solutions of the mineral acids and of common salt and a solution of equal parts of sulphate of copper and sal-ammoniac act similarly. Writing with rice water and developing with iodine was a device much used during the Indian Mutiny.

Printing Inks.—Printing inks are essentially mixtures of a pigment and a varnish. The varnish is prepared from linseed oil, rosin and soap; the oil must be as old as possible; the rosin may be black or amber; and the soap, which is indispensable since it causes the ink to adhere uniformly to the type and also to leave the type clean after taking an impression, is yellow, or turpentine soap for dark inks, and curd soap for light inks. The varnish is prepared as follows: The oil is carefully heated until it “strings” properly, i.e. a drop removed from the vessel on a rod, when placed upon a plate and the rod drawn away, forms a thread about ½ in. long. The rosin is carefully and slowly added and the mixture well stirred. The soap is then stirred in. The ink is prepared by mixing the varnish with the pigment, and grinding the mass to impalpable fineness either in a levigating mill or by a stone and muller. For black ink, lamp-black mixed with a little indigo or Prussian blue is the pigment employed; for wood engravings it may be mixed with ivory black, and for copper plates with ivory or Frankfurt black; for lithographic reproductions Paris black is used. Red inks are made with carmine or cochineal; red lead is used in cheap inks, but it rapidly blackens. Blue inks are made with indigo or Prussian blue; yellow with lead chromate or yellow ochre; green is made by mixing yellow and blue; and purple by mixing red and blue.

---